Imagine this – it’s 5 pm on a Friday evening, and your phone is dying, so you need to use your mobile charger to make sure you’re not left without your device all weekend. You reach into your bag, and…nothing! You reach into every pocket you have on your clothes and still can’t find it! If this sounds familiar to you (or if it hasn’t happened yet but you really don’t want it to), then read on to learn about how to repair your mobile charger in 6 easy steps!
Step 1: What you need
In order to repair your mobile charger, you will need a few tools and materials. You will need a screwdriver, wire cutters, and electrical tape to do this job. You will also need a new power cord. If you do not have a new power cord, you can try to salvage one from an old appliance.
Step 2: Gather all the damaged pieces
Now that you have the basic idea of what you need to do, it’s time to gather all the damaged pieces. This can be a little tricky, depending on how badly damaged your charger is. But try your best to get all the pieces, including any screws or nails that may have come loose.
Step 3: Clean the cut wires with sandpaper
If the cut wires are jagged or frayed, use sandpaper to clean up the edges. This will help ensure a good connection when you solder the wires back together. First, use coarse-grit sandpaper to remove any large pieces of insulation or metal. Then, switch to a finer-grit sandpaper and lightly sand the area until it’s smooth.
Step 4: Connect them together with solder
If you’re new to soldering, don’t worry – it’s not as difficult as it looks. Just follow these simple steps and you’ll have your phone charger repaired in no time.
Step 5: Reassemble everything and try out if it works
Now that you have everything replaced or repaired, it’s time to put your mobile charger back together. Make sure that all the screws are tightened and double-check that your soldering is secure. Once you’ve done that, plug in your charger and see if it works. If it does, congratulations! You’ve successfully repaired your mobile charger.
Step 6: Enjoy a functional phone charger
After following these six simple steps, you should have a functional phone charger once again. Be sure to test it out before you put it away, and enjoy the peace of mind that comes with knowing you can fix things yourself.